Jumat, 23 Agustus 2013

TrackStar 1/10~1/8 Scale Turbo Glow Plug No.3 (HOT)

TrackStar 1/10~1/8 Scale Turbo Glow Plug No.3 (HOT)

TrackStar glow plugs are an affordable yet quality product manufactured in Taiwan. TrackStar Turbo glow plugs are specially shaped to provide more efficient and powerful running of your nitro engine. They are ideally suited for 1/10~1/8 scale RC cars. At this price you can stock up your starter box and never be without a spare plug again!
Specifications:
Voltage: 1.3~1.5
Heat rating: Hot
Harga: Sold

TrackStar 1/10~1/8 Scale Glow Plug No.3 (HOT) Standart Engine

TrackStar 1/10~1/8 Scale Glow Plug No.3 (HOT) Standart Engine
TrackStar glow plugs are an affordable yet quality product manufactured in Taiwan. They are ideally suited for 1/10~1/8 scale RC cars. At this price you can stock up your starter box and never be without a spare plug again!
Specifications:
Voltage: 1.3~1.5
Heat rating: Hot
Harga: Sold

Turnigy Glow Plug Lighter Tool

Turnigy Glow Plug Lighter Tool

Required one 1.5V AA size battery.
Harga: Sold

Hobby King GT-2 2.4Ghz Receiver 3Ch

Hobby King GT-2 2.4Ghz Receiver 3Ch
Specification:
Model: Car/Boat
Channels: 3ch
Frequency band: 2.4Ghz
Modulation: GFSK
Sensitivity: 1024
RF. receiver sensitivity: -100dbm
Fail Safe: Yes
Power: 4.5~6VDC
Weight: 5g
Antenna length: 26mm
Size: 37.6 x 22.3 x 13mm
CE & FCC certified
Harga: 110Rb

Hobbyking 2-8S Cell Checker with Low Voltage Alarm

Hobbyking 2-8S Cell Checker with Low Voltage Alarm









The Hobbyking 2-8S Cell Checker with Low Voltage Alarm features loud twin Piezo alarms to notify you once your cells reach a user defined voltage. You can customize the alarm to sound at a voltage between 2.7v~3.8v Per cell in 0.10v increments by pressing the setting mode button. This unit also features a handy built in LED display that will show the voltage of each cell followed by the over all voltage of the pack.
Don’t risk your model by flying on depleted batteries, at this price piece of mind flying cant be any cheaper!

Specifications.
Input: 2~8S
Battery type: Lipo/LiFe/Li-ion
Cell Voltage Display Range: 0.5v~4.5v
Total Voltage Display Range: 3.7~36v
Alarm set values: Off or 2.7~3.8v
Size: 41x30x13mm
Weight: 13g(with case)

Harga: Backorder

TURNIGY 3A UBEC w/ Noise Reduction

TURNIGY 3A UBEC w/ Noise Reduction

Spec.
Output: 5v/3A or 6v/3A (Selectable via jumper)
Noise: <50mvp-p br="" v="">Input: 5.5v-23v (2-5S Lipo pack, 5-15cells NiMh)
Size: 41.6x16.6x7.0mm
Weight: 7.5g

Features.
Over current and over heat protection.
Switching frequency 300khz.
Chip Efficiency is 92%. This UBEC utilises switching technology to gain a much higher efficiency than liniar BEC. Which means less heat and longer battery life.
The UBEC is equiped with a noise reduction alloy housing to reduce noise even further.
Incorrect polarity safety feature ensures the UBEC will not be destroyed should the battery be connected incorrectly.

Not* this is an original UBEC. There is now a cloned version on the market, it is slightly cheaper but reliability may not be as good, find it here:HKUBEC3A

Harga: 100Rb

ZIPPY Flightmax 6000mah 2S2P 35C Hardcase Car Lipoly

ZIPPY Flightmax 6000mah 2S2P 35C Hardcase Car Lipoly

Zippy Flightmax batteries deliver full capacity & discharge as well as being the best value batteries in the hobby market today!

Hardcase packs are a must for RC Car enthusiasts. The case helps to ensure that the batteries can stand up to the added stress and shock associated with R/C vehicles.

Spec:
Capacity: 6000mAh
Voltage: 2S2P / 2 Cell / 7.4v
Discharge: 35C Constant / 45C Burst
Max Charge Rate: 1C
Weight: 338g (including wire, plug & case)
Dimensions: 138x46x25mm
Balance Plug: JST-XH
Discharge Plug: HXT-4mm
Harga: Backorder

Turnigy 2/3A 6.0V 1500mAh High Power Series NiMH Receiver Hump Pack

Turnigy 2/3A 6.0V 1500mAh High Power Series NiMH Receiver Hump Pack

Turnigy Ni-MH Power Series batteries are high quality cells ideally suited for many different R/C applications. Offering high-discharge rates of up to 15C, Turnigy Power Series cells will be sure to provide the performance that your power-hungry model requires!

This five cell 2/3A Ni-Mh hump pack is designed for use as a receiver battery. It comes with a JR style discharge plug pre-installed.

Specs:
Category: 2/3A battery
Capacity: 1500mAh
Discharge: 10C constant / 15C burst
Voltage: 6.0V
Chemistry: Ni-MH rechargeable
Weight: 141g
Dimensions: 50x32x17mm
Discharge Plug: JR style
Harga: Backorder

Senin, 19 Agustus 2013

Werks B6 Pro.21 Nitro Engine Second / Bekas Kompresi Mantap

Werks B6 Pro.21 Engine Seken Kompresi Mantap


Specifications:
Stroke: 16.50mm
Bore: 16.30mm
RPM Range: 3,000 to 41,000
Output: 2.7hp at 35,000 rpm
Sleeve: Five Port
Piston: CNC Machined High-Silicon content aluminum alloy
Connecting Rod: Knife edged, double bushed, 7075 T6 construction
Carburetor: 2010 version, Aluminum 2 needle with adjustable venturi (7mm
stock) and heat isolation sleeve
Head Button: Turbo
Cooling Head: CNC Machined, lightened, low CG design
engine aja tanpa printilan macem2 (flywheel, kopling dll)
Harganya 1.6Jt Nego

Karburator Werks B6 PRO New

Karburator Werks B6 PRO New


www.werksracing.com
Harga: 400rb aja

Shock Offroad original traxxas Emaxx Size 100mm / 10cm

Shock Offroad original traxxas Emaxx Size 100mm / 10cm

cocok dipakai di kit offroad 1/10 dan 1/8
isi paket 4bh shock dan spacer
Harga: Backorder

Turnigy Hex Driver set 4 in 1 1.5~ 3.0

Turnigy Hex Driver set 4 in 1 1.5~ 3.0
The Turnigy 4 in 1 Hex driver set comes with light weight handles and includes 4 interchangable tips 1.5, 2.0, 2.5 and 3.0.
The hardened tip and shaft ensure no rounding or breaking on even the worst of hex bolts.
Harga: 115Rb

Turnigy Long Shaft 4pc Hex driver set

Turnigy Long Shaft 4pc Hex driver set
High strength and light weight.
The 4pc Turnigy screw driver set includes 1.5, 2.0, 2.5 and 3.0.
Made from high strength tool steel, these tools reduce rounding and ensure a secure screw fit each time.
Harga: 150Rb

Hex Wrench / Kuncil L Set 1.5mm, 2mm, 2.5mm, 3mm

Hex Wrench / Kuncil L Set 1.5mm, 2mm, 2.5mm, 3mm

Isi Paket 4 buah kunci L dengan kualitas baik dijamin kuat saya Sudah menggunakannya selama 3 Tahun dan tidak ada masalah
Harga: 40Rb

Power Tool Hex Bit / Mata Obeng Listrik

Power Tool Hex Bit / Mata Obeng Listrik
Hex Wrench / Kuncil Bit 1.5mm, 2mm, 2.5mm, 3mm
Isi Paket 3 buah Bit Hex 2mm, 2.5mm, 3m dan 1 Buah Kunci L 1.5mm
Harga: 100Rb

Obeng Elektrik Black & Decker 6v Cordless Screw Driver 14 Bits

Obeng Elektrik Black & Decker 6v Cordless Screw Driver 14 Bits

Mulailah tinggalkan obeng manual/konvesional dan beralih ke obeng portable yg tidak bikin tangan kita capek, pegel, lecet bahkan keplintir ketika membuka/mengencangkan mur maupun baut. Dengan menggunakan screwdriver portbale Black&Decker 6V maka segala urusan pekerjaan rumah anda semakin praktis, nyaman dan efisien.
- lengkap dapat mata screwdriver (5mm) sebanyak 14 pcs (Ph1, Ph2, Ph3, Pz1, Pz2, Pz3, SL6, SL8, SL10, T10, T20, S1, S2, S3)
- voltase 6v (pake 4pcs alkaline AA atau bisa pake rechargeable batery AA)
- speed 130rpm
- tombol bisa maju & mundur (forward/ reverse)
- dapat 4pcs baterai alkaline
Harga: 180Rb

Hobby King HKSS programming card for HK 80A, 120A, 150A ESC

Hobby King HKSS programming card for HK 80A, 120A, 150A ESC

Programming features:
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Running mode
Motor Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups
Reverse throttle limit
Throttle limit
Braking percent
Percent drag and brake
ESC operating frequency
Factory default setup restore

Factory default settings:
Forward with pause then reverse
Battery type Detect:  LiPo with Automatic Cell
Low voltage cutoff threshold:  Medium (3.0V/65% )
Motor Timing :  Normal
Soft Acceleration Start Up:  Medium
Reverse throttle limit: Medium
Throttle limit: Low
Braking percent: Medium  
Percent drag and brake: Low
Neutral deadband: 4%
ESC operating frequency: 8kHz
Only to be used with HK 80A, 120A, 150A ESC.
Esc yg Disupport
Harga: Rp. 110rb

Dinamo Brushless Tenshock SC411 Sensored 4000 & 4600kv

Dinamo Brushless Tenshock SC411 Sensored 4000 & 4600kv
Tenshock SC-411
Features
    CNC machined AL heat sink casing
    High efficiency 4-Pole 12 Slots brushless motor
    Superior rotor design with kevlar wrapping
    High purity copper windings making maximizes conductivity
    Powerful sintered neodymium magnet
    High torque and light weight
    240 mm cable for more options
    Dual-plug sensor for all sensored and sensorless system
Harga: Rp. 900rb

ESC Xerun Hobbywing 120A + Progcard TURBO READY

ESC Xerun Hobbywing 120A + Progcard TURBO READY
ESC Specification
Model: XERUN-120A-V2
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>3.5T (on-road), =>5.5T(off-road) (Works with 5-6 NiMH or 2S Li-Po),
=>5.5T (on-road), =>8.5T(off-road) (Works with 8-9 NiMH or 3S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V/3A Built-in BEC
Cooling Fan Working Voltage:
5V / 0.16A, max. 8V (The fan gets the power supply directly from the battery)
Suitable Model: 1/10, 1/12 on-road and off -road, 1/8, 1/10 scale rock crawler
TURBO READY
Harga: Rp.1.3Jt

HobbyKing On-board Glowdriver (v2) / Glow Plug Otomatis

HobbyKing On-board Glowdriver (v2) / Glow Plug Otomatis

This lightweight on-board glow driver unit is ideal for model aircraft, helicopters and cars and features an LED on/off switch, a voltage regulator and all leads. Simple to install, a push of the button will ignite your glow plug and keep it on for 15secs. The unit will automatically adjust the output current to ensure the best working temperature for the glow plug.

Although it featues an input voltage range from 6v-12v, and power can be taken from the RX power supply, a 2s Lipoly power supply is advised.

Spec:
6v~12v Auto Sensed input voltage
Constant output voltage 1.4v, 6A max output.
On/off switch, also auto shutdown after 15s.
Short Circuit and over-heat protection.
High efficiency switch mode BEC
LED on/off display.

Dimensions:
Weight: 22g (inc all leads & switch)
Dimensions (BEC): 32mm x 23mm x 7mm

Ini pemantik busi otomatis sangat ideal untuk pesawat model, helikopter dan mobil dengan fitur LED on / off switch, regulator tegangan. pemasangan sangat mudah, dengan menekan tombol akan memicu glow plug Anda dan tetap menyala selama 15 detik. Unit secara otomatis akan menyesuaikan arus keluaran untuk memastikan suhu kerja terbaik untuk glow plug.

dengan berbagai tegangan input dari 6V-12v, dan power dapat diambil dari power supply RX, 2s Lipoly power supply disarankan.

Spec:
6V ~ 12v input
Konstan tegangan output 1.4v, 6A max output.
On / off switch, juga otomatis shutdown setelah 15s.
perlindungan over heat dan korsleting
efisiensi tinggi
LED on / off display.

dimensi:
Berat: 22g (inc semua lead & switch)
Dimensi (BEC): 32mm x 23mm x 7mm

ini adalah alat glow plug otomatis yang dapat menggantikan glow lighter anda, tekan tombol dan nyalakan enginenya alat akan mati otomatis setelah 15 detik dapat dimatikan secara manual juga
Harga: Kosong

Yeah Racing Modified 540 Sensored Brushless Motor 8.5T 4200kv For 1:10 Onroad & Offroad RC Car

[B]Yeah Racing Modified 540 Sensored Brushless Motor 8.5T 4200kv For 1:10 Onroad & Offroad RC Car [/B]

New adjustable timing will allow you to have Smooth Low. Mid Power Kick. or Overall all Smooth Power. HIGH POWER CURRENT PLUG IN system FOR BRUSHLESS MOTOR.
Feature:
    Adjustable timing
    Hand-wound for maximum copper fill
    High purity copper windings to maximize conductivity
    Sensor-based for excellent torque and low speed drive-ability
    CNC machined heat sink
    Powerful sintered neodymium magnet
    Precision engineered for maximum energy conversion
    Super smooth start up
    All motor is factory tested to ensure proper performance

Specification:
    Design: Sensored
    Size: 540
    Turns: 8.5T
    Input voltage: Li-Po 1-2S
    KV (RPM/volt): 4200
    Shaft Diam: 3.17
    Build-in Fan: Yes
Sudah Berikut Fan Yeah Racing Tornado
Harga: Rp. 650rb Tanpa Fan Rp. 550rb Saja

Turnigy TrackStar 8.5T Sensored Brushless Motor 3983KV

Turnigy TrackStar 8.5T Sensored Brushless Motor 3983KV

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!
Featuring a quality anodized CNC motor can, radial cooling fan, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.
The TrackStar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors.

Features:            
• Sensor-Based for Excellent Torque and Low-Speed Driveability
• Radial Fan Incorporated into Front End Bell
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Billet T6 Aluminum Motor Can
• High Purity Copper Windings
• High Power Solder Tabs
• Removable/Replaceable Rotor    
• Powerful Sintered Neodymium Magnet  
• Precision Engineered for Maximum Energy Conversion
*Note: Sensor cable included

Specs:
Can Size: 540
Turns: 8.5
RPM/v: 3983kv
Poles: 2
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4~11.1V (2~3S)
Max Current: 33A
Max Watts: 365w
Resistance: 0.0141ohm
No Load Current: 5.8A
Shaft Size: 3.175mm
Can Diameter: 36mm
Can Length: 51.5mm
Weight: 158g
Harga: Backorder

Turnigy TrackStar SCT 4.5T Sensored Brushless Motor 4550KV (550 size)

Turnigy TrackStar SCT 4.5T Sensored Brushless Motor 4550KV (550 size)
Cocok digunakan di kit shortcourse 1/10


The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!
Trackstar SCT series motors have been optimized for use with todays high power 4x4 Shortcourse racing trucks. The longer can design offers high torque and power handling to give your SCT the performance it craves!
Featuring a quality anodized CNC motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you won't find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.
The TrackStar brushless motors make a great upgrade for 1/10th short course trucks, buggies or anything else that uses 550 size motors.

Features:            
• Sensor-Based for Excellent Torque and Low-Speed Driveability
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Billet T6 Aluminum Motor Can
• High Purity Copper Windings
• High Power Solder Tabs
• Removable/Replaceable Rotor    
• Powerful Sintered Neodymium Magnet  
• Precision Engineered for Maximum Energy Conversion
*Note: Sensor cable included

Specs:
Can Size: 550
Turns: 4
RPM/v: 4550kv
Poles: 2
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 128A
Max Watts: 910w
Resistance: 0.0057ohm
No Load Current: 4A
Shaft Size: 5mm
Can Diameter: 36mm
Can Length: 65mm
Weight: 236g
Harga: Rp.680Rb

Hobbywing 3 In 1 Professional Multifuction LCD Program Box for RC Programmable ESC #Program box

Hobbywing 3 In 1 Professional Multifuction LCD Program Box for RC Programmable ESC #Program box
A) The programmable items for the XERUN and EZRUN series car ESC:
    Running Mode
    Drag Brake Force
    Low Voltage Cut-Off Threshold
    Start Mode
    Maximum Brake Force
    Maximum Reverse Force
    Initial Brake Force
    Throttle Neutral Range
    Timing
    Over-Heat Protection
    Motor Rotation
    Lipo Cells Amount
*Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.
B) The programmable items for the PLATINUM series airplane ESC:
    Brake
    Battery Type
    Low Voltage Protection Mode (Cutoff Mode)
    Low Voltage Protection Threshold (Cutoff Threshold)
    Start Mode
    Timing
    Governor Mode
    Reserved Item #1
    PWM Frequency
    Built-In BEC Output
    Reserved Item #2
    Lipo Cells Amount
Harga: Rp. 180rb

CNC Alloy Servo Arm Short / Servo Horn

CNC Alloy Servo Arm Short / Servo Horn
Digunakan sebagai upgrade / pengganti Servo Arm / servo horn plastik untuk steering / steer kit RC anda
Futaba 25T

Hitec 24T

JR 23T
Harga: 60Rb

HK15298 High Voltage Coreless Digital MG/BB Servo 66g / 15kg / 0.11s

HK15298 High Voltage Coreless Digital MG/BB Servo 66g / 15kg / 0.11s

HK15298 High Voltage Coreless Digital MG/BB Servo Spec.
Torque: 14kg @ 6v, 15kg @ 7.4v
Weight: 66g
Speed: 0.13 / 60deg @ 6v, 0.11 / 60deg @ 7.4v
Voltage: 4.8v~7.4v
Motor type: Coreless
Plug: JR Style
 Features:
Alloy Heatsink
Dual Ball-Raced
Harga: Backorder

HK15328A Analog BB/MG Servo 58g / 12.8kg / 0.20s

HK15328A Analog BB/MG Servo 58g / 12.8kg / 0.20s
HK15328A Analog BB/MG Servo Spec.
Torque: 10kg @ 4.8v, 12.8kg @ 6v
Weight: 58g
Speed: 0.23 / 60deg @ 4.8v, 0.20 / 60 deg @ 6v
Voltage: 4.8v~6v
Plug: JR style

Features:
Metal Gears
Dual Ball-race
Harga: Backorder

Xtra Speed Li-Po LiON LiFe NiMh NiCd 6A-50W Balance Charger/ Discharger (G.T. POWER)

Xtra Speed Li-Po LiON LiFe NiMh NiCd 6A-50W Balance Charger/ Discharger (G.T. POWER)

Spek Komplitnya
Description:
Xtra Speed Microprocessor controlled high performance rapid 6A-50W Balance charger/discharger (AC/DC) #XS-35392 is a complete charging package for LiPo, LiOn, LiFe, NiMh, NiCd, Pb Batteries! This charger is AC/DC compatible so it can be plugged into a wall outlet using the included power supply or powered from your car battery out in the field. This machine can handle charging, discharging, balancing (LiPO/LiON/LiFE cells), cycling and much more. And your charge options will be saved in the charger so it is quick and easy to plug it in and start charging right away.

Feature:
    Charges LiPo, LiON, LiFe (1S-6S cells) ; NiMh, NiCs (1-15 cells); Lead-Acid (2V-20V)
    Charging, Discharging, Cycling, Balancing (LiPO/LiION/LiFE cells) (1-5 cycles)
    Balance Port Built In (Balances 2S-6S Batteries) (Uses Align/E-Flite/CSRC style Balance Plug Port) (Thunder Power adapter available separately)

Specification:
    Operating Voltage Range: AC100-240V / DC11.0-18.0V
    Charge Power: Max.50 Watts
    Discharger Power: Max.5 Watts
    Charge current range: 0.1-6.0A
    Discharge current range: 0.1-1.0A
    Cell Count: 1-15 NiCd/NiMh cells
    Cell Count: 1-6 LiPo/Lilon/LiFe cells
    Cell Count: 1-10 Lead-Acid cells (2V-20V)
    Current Drain for Balancing Lithium: 300mA
    Net Weight: 570g
    Dimensions: 135x148x45mm

rcMart Technician Comment:
    Not Suggest for NI-MH Charging

Harga: Backorder